Delaware County Engineer

50 Channing Street

Delaware, Ohio 43015

Bidding & Contracts

Contact the Webmaster

CHRIS E. BAUSERMAN, PE, PS • DELAWARE COUNTY ENGINEER

Administration     |     Design     |     Development     |     Inspection    |    Map     |    Operations    |     Permits     |     Stormwater

  Design Department  Design - About Us - Bridge Info - Bridge Map - CIP Notes - CIP Program - Consultants - FAQs - OPWC Info - Resurfacing Info - Traffic Info - Township Info

BRIDGE LOAD LIMIT MAP

  2011 bridge load limit map (revised 10-19-11) (467 KB)

This map shows the maximum allowable loads (carrying capacity) for County maintained bridges.  For bridges on state routes or city streets, contact that agency individually.

Load limits are expressed in a multiple of Ohio Legal Load (O.L.L.) as determined by the Ohio Department of Transportation Operational Guide for Vehicles Operating with an Oversize/Overweight Special Hauling Permit.
 
Hauling Permit applications will be reviewed upon submittal to insure that the vehicle % O.L.L. does not exceed the bridge's rated % O.L.L. Permits will not be issued allowing vehicles to cross posted bridges or bridges that are rated less than the vehicle's % O.L.L., unless a "Superload" application is completed and reviewed by the engineering staff.
 
Questions regarding permits and the map should be directed to the Delaware County Engineer's Office, Permit Department.
 
Michelle Strohl, Permit Clerk
Phone: (740) 833-2439

    Click here to get the FREE Adobe Acrobat reader